Introducing the Super Rod Magnetic Link Testing Kit!

Are you looking for a smarter way to carry out continuity and insulation resistance testing? Tired of disconnecting conductors, risking damage to carefully dressed boards, or losing time on inspections? The Super Rod SRMLTK Magnetic Link Testing Kit brings together two purpose-built testing tools in one organised, professional kit – designed to help electricians approach EICRs smarter, with greater convenience, accuracy, less disruption, and full compliance on every job.

Meet the Inventor
Both products in this kit were invented by Wayne Draper – an electrical engineer and assessor who spent years identifying a better way to test without the need to disconnect conductors from boards.

Wayne explains: “I’ve assessed a lot of people on Inspection & Testing qualifications and always felt there had to be a better way of linking R1+R2 without disconnecting the conductors from the board in any way. I also wanted to reduce the amount of damage on test rigs and examination boards.”

Having already brought the R1R2 Link to market with Super Rod, Wayne returned to develop the IR Link – a natural next step driven by the growing industry challenge of testing circuits with sensitive equipment. As RCBOs and AFDDs became more common and the 250V Line and Neutral to Earth test gained popularity, the need to remove conductors from carefully dressed boards was becoming an increasing frustration for electricians. The IR Link was the answer to that problem – a smarter, non-invasive solution built directly from contractor feedback.

What’s in the Kit?

SRR1R2 – R1R2 Link Lead: Smarter Continuity Testing

The SRR1R2 allows you to link R1+R2 at the consumer unit without disconnecting any conductors – making continuity testing less invasive and reducing the risk of damage, particularly on EICRs. The PZ screwdriver bit design increases contact surface area, guaranteeing no more than 0.01Ω of additional resistance. The magnet sits behind the bit, not at the tip, keeping it out of the circuit entirely for accurate, reliable results. Two probe types are included: a red PZ2 probe for MCBs and a yellow PZ1 probe with a longer shaft for RCBOs and AFDDs with deeper recessed terminals https://super-rod.co.uk/r1-r2-link/

SRIR – IR Link Lead: Insulation Resistance Testing Without the Hassle

The SRIR is a high-strength magnetic link for insulation resistance testing of Line and Neutral to Earth at 250V DC on RCBO protected circuits. Particularly those with sensitive equipment such as USB sockets and LED lighting. Connecting directly to the Line and Neutral screw terminals, the IR Link brings both into a single banana socket – one lead links Line and Neutral, the second connects to the earth bar, leaving both hands free to operate test equipment. No conductor removal, no dismantling of consumer units. Fully compliant with BS7671:2018+A2:2022 and IET Guidance Note 3, Chapter 2.6.7, and CAT III rated for professional safety https://super-rod.co.uk/ir-link/

Kit Pouch – Convenience: All Your Test Leads In One Place

Electricians carry multiple links and test leads on site. Our transparent single-zipper pouch keeps them all organised, safe, and instantly accessible. A reinforced transparent side panel lets you see exactly what’s inside, and the carabiner attaches conveniently to your bag or belt.

Who Is the Super Rod SRMLTK Designed For?

The SRMLTK is the ideal testing kit for electricians and electrical contractors carrying out initial verifications and EICR inspections who need a smarter, safer, and more efficient approach to continuity and insulation resistance testing – fully in line with current BS7671 standards.